Particle Software

This software is dedicated for Smart-Its core boards that are attached to a chair. Pre-Compiled versions for 1.0-1 core boards and 1/80 and higher are available.

Sources including compiled .hex file

The programs that must be running on the Particle for using APS
Allows to remotely configure a Particle/SSimp combination.
Used for the combination of Particle Boards and SSimp (sensor boards without own processor) boards
You have to program both the Particle before you can access them via APSConfig
After you have programmed the Particle and configured them (via APSConfig) you can see the sensor values with the help of the Particle Analyser Program
This is the standard program for Particles

Sources including compiled .hex file	Download	For 2/32 Particle
PRS for CCS Compiler. Sources including compiled .hex file	Download	For 2/32 Particle
PRS for CCS Compiler. Sources including compiled .hex file	Download	For 2/29 Particle
PRS for CCS Compiler. Sources including compiled .hex file	Download	For 2/10 Particle

The programs that must be running on the Particle and the SPart for using APS
Allows to remotely configure a Particle/Spart combination.
Used for the combination of Particle Boards and SPart (sensor boards with processor) boards
You have to program both the Particle and the SPart before you can access them via APSConfig
After you have programmed the boards and configured them (via APSConfig) you can see the sensor values with the help of the Particle Analyser Program

Sources including compiled .hex file

This software bundle provides compatibility to old settings with Smart-Its Core boards version 1.0-1 and Smart-Its sensor boards version 1.0-2.
Functionality: Transfers data from Sensor to Core board and back. Transfered data are sent to other Smart-Its in the environment via RF by the Core board.

Sources including compiled .hex file

This software is dedicated for Smart-Its core boards. Pre-Compiled versions for 1.0-1 core boards and 1/80 and higher are available.
Functionality: A general software to measures number of ball switch events from the ball-swich on the core board

Sources including compiled .hex file

This software enables the Particle 2/29 to sense the receiver signal strength indicator (RSSI). The archive includes the complete software for the Particle (ready-to-burn) and a Java program to actually request the readings. The Java program is built with the high-level libparticle
This code was contributed by Sabin Wendhack (TecO) and Matthias Kranz (LMU Munich).

Sources including compiled .hex file for CCS Compiler and Particle 2/32 (01.07.2006)	Download
Sources including compiled .hex file (25.07.2005)	Download

Ballswitch Test (1.7.2006), for CCS Compiler and PArticle 2/32	Download
All Sensors (Sources including compiled .hex file)	Download
All Sensors (Sources including compiled .hex file)	Download
Beacon (Sources including compiled .hex file)	Download
Breakoutex (Sources including compiled .hex file)	Download
Echo (Sources including compiled .hex file)	Download
Repeater (Sources including compiled .hex file)	Download
Repeater (Sources including compiled .hex file)	Download

If you want to use a previous release from some of the examples, you can download older releases from the previous releases page

For further information please have a look at the Particle Homepage or use the discussion forum if you have any questions.